Setting up portable lights
In this mini task we set up a portable light for a small studio type effect in any location.
Step one for setting up the lights is to open up the stand and make sure its secure and wont tumble over.
Step two is to fit the light on the top and make sure it is in correctly then screw the pole in.
Step three, now that the light head is fully fitted you may change it to a spotlight such as snoot for example.
Step four, make sure you fit the cables into the light correctly from either a mains socket or a battery to power it depending on your objective and location.
step five, you can fit an umbrella into the designated side holes of the light, there is also a holder that you can screw to keep it held in tight so it doesn't wobble or fall out.
Step six, the light is now complete and all you will have to do is turn the switch on at the wall or battery.
The portable light is now set up.
Here is a photo with my set up:
Step four, make sure you fit the cables into the light correctly from either a mains socket or a battery to power it depending on your objective and location.
step five, you can fit an umbrella into the designated side holes of the light, there is also a holder that you can screw to keep it held in tight so it doesn't wobble or fall out.
Step six, the light is now complete and all you will have to do is turn the switch on at the wall or battery.
The portable light is now set up.
Here is a photo with my set up:
No comments:
Post a Comment